Presently, virtually all brand new computer systems contain SSD drives in place of HDD drives. You will find superlatives about them everywhere in the specialized press – that they’re a lot faster and conduct better and they are the future of home computer and laptop computer generation.
Nonetheless, how can SSDs fare within the website hosting community? Could they be well–performing enough to substitute the verified HDDs? At Start-N-Point, we will make it easier to much better be aware of the differences among an SSD and an HDD and judge the one that most accurately fits you needs.
1. Access Time
With the launch of SSD drives, data accessibility speeds have gone through the roof. Thanks to the brand new electronic interfaces employed in SSD drives, the normal file access time has been reduced towards a record low of 0.1millisecond.
HDD drives continue to utilize the very same fundamental data access technique that was actually created in the 1950s. Though it has been substantially improved ever since, it’s slow in comparison with what SSDs will offer. HDD drives’ data file access rate ranges between 5 and 8 milliseconds.
2. Random I/O Performance
Due to the same revolutionary technique that enables for better access times, also you can take pleasure in better I/O efficiency with SSD drives. They are able to conduct two times as many operations within a specific time as compared to an HDD drive.
An SSD can handle at the least 6000 IO’s per second.
During the very same lab tests, the HDD drives demonstrated to be considerably slower, with only 400 IO operations maintained per second. Although this seems to be a large number, when you have a busy web server that hosts a lot of well–known sites, a sluggish harddrive may lead to slow–loading sites.
The lack of moving elements and spinning disks inside SSD drives, and also the latest improvements in electric interface technology have led to a significantly safer data storage device, with an normal failure rate of 0.5%.
HDD drives make use of rotating disks for holding and browsing files – a technology since the 1950s. Along with hard disks magnetically hanging in mid–air, spinning at 7200 rpm, the chances of something going wrong are generally increased.
The standard rate of failing of HDD drives ranges between 2% and 5%.
4. Energy Conservation
SSD drives are considerably small compared to HDD drives and they do not have just about any moving components whatsoever. This means that they don’t create so much heat and require much less energy to operate and fewer power for cooling down reasons.
SSDs consume amongst 2 and 5 watts.
From the second they were made, HDDs were always extremely electrical power–hungry systems. Then when you have a web server with several HDD drives, this will certainly increase the monthly electricity bill.
Normally, HDDs take in between 6 and 15 watts.
5. CPU Power
Because of SSD drives’ better I/O effectiveness, the main web server CPU can easily work with data queries much faster and save time for other operations.
The standard I/O wait for SSD drives is just 1%.
HDD drives support slower accessibility speeds when compared to SSDs do, resulting in the CPU needing to delay, whilst arranging allocations for the HDD to locate and give back the required data.
The standard I/O wait for HDD drives is approximately 7%.
6.Input/Output Request Times
It’s time for a few real–world examples. We, at Start-N-Point, competed a complete system backup on a hosting server using only SSDs for file storage reasons. During that process, the standard service time for an I/O call remained under 20 ms.
In comparison with SSD drives, HDDs deliver much slower service rates for input/output demands. Throughout a server backup, the common service time for any I/O query can vary between 400 and 500 ms.
7. Backup Rates
Talking about back–ups and SSDs – we have found a significant advancement with the back–up speed since we switched to SSDs. Right now, a standard hosting server back–up requires only 6 hours.
On the flip side, with a hosting server with HDD drives, a similar backup usually takes three or four times as long to complete. An entire backup of an HDD–powered hosting server normally takes 20 to 24 hours.
With Start-N-Point, you can get SSD–operated web hosting services at good prices. The hosting consist of SSD drives automatically. Get an account with us and observe how your web sites can become far better without delay.
- Live Demo
- Subscribe now. There won’t be setup charges you’ll also find total root and SSH access to your server. 99.9% network uptime is warranted.
Compare our prices
- Take a look at our rates and choose the right Virtual Private Server for your powerful web sites. You can easily upgrade to a more advanced VPS Hosting package with only a click of the mouse.
- Compare our hosting plans
- Get in touch with us 24x7 by email or by using the extra–fast ticketing system. Our technicians are ready to respond to any of your inquiries within just 60 minutes.